KS-2573 Soviet autocrane conversion set for Trumpeter Ural kit, 1/35
89.4 €
KS-2573 Soviet autocrane conversion set for Trumpeter Ural kit, 1/35
Item number:
BM3538
In stock
The KS-2573 was one of the best-known all-terrain truck-mounted cranes produced in the Soviet Union. Developed by the Ivanovo Crane Plant in the mid-1980s, it was designed to replace the earlier KS-2572 model. The crane, with a lifting capacity of 6.3 tonnes, was mounted on the all-wheel-drive Ural-4320/43202 truck chassis, giving it excellent off-road mobility.
The KS-2573 was widely used on construction sites, in industrial facilities, mining operations and by military engineering units. Thanks to its robust design, ease of maintenance and outstanding cross-country capability, it remained in service for many years throughout the Soviet Union and numerous Eastern European countries.
Mounted on the distinctive Ural chassis, the KS-2573 became one of the most recognizable Soviet mobile cranes. Both military and civilian versions played an important role in lifting heavy loads and supporting engineering, construction and logistics operations.
What's in the box:
Highly detailed resin parts
3D printed components
Photo-etched brass parts
Decal sheet included
Illustrated assembly instructions
Recommended age 13 over.
Unassembled resin kit with brass (photoetched parts) parts. Paint and glue are not included!
The attached drawings instructions help to assembly.
You can use sharp tools (Sniccer, jigsaw or electric mini drill with cutter disk, thick is max. 0,5-1mm.)
to take apart the parts from the resin blocks.
Please use careful, and note that this requires a little more experience,
such than to injection molded plastic kits!
Protect the resin parts from strong heat! (Strong sunshine, radiator, hot water, etc.)
Recommended glue for the resin parts is super glue.
If you have any further questions, please contact us by email. You can find our contact informations in the menu: "information".
Length: 22cm
The KS-2573 was widely used on construction sites, in industrial facilities, mining operations and by military engineering units. Thanks to its robust design, ease of maintenance and outstanding cross-country capability, it remained in service for many years throughout the Soviet Union and numerous Eastern European countries.
Mounted on the distinctive Ural chassis, the KS-2573 became one of the most recognizable Soviet mobile cranes. Both military and civilian versions played an important role in lifting heavy loads and supporting engineering, construction and logistics operations.
What's in the box:
Highly detailed resin parts
3D printed components
Photo-etched brass parts
Decal sheet included
Illustrated assembly instructions
Recommended age 13 over.
Unassembled resin kit with brass (photoetched parts) parts. Paint and glue are not included!
The attached drawings instructions help to assembly.
You can use sharp tools (Sniccer, jigsaw or electric mini drill with cutter disk, thick is max. 0,5-1mm.)
to take apart the parts from the resin blocks.
Please use careful, and note that this requires a little more experience,
such than to injection molded plastic kits!
Protect the resin parts from strong heat! (Strong sunshine, radiator, hot water, etc.)
Recommended glue for the resin parts is super glue.
If you have any further questions, please contact us by email. You can find our contact informations in the menu: "information".
Length: 22cm
89.4 €
Points earned after purchase:
0.89 €
Related products