IFA W50 East-German dumper truck, resin model kit, 1/35
101.35 €
IFA W50 East-German dumper truck, resin model kit, 1/35
Item number:
BM3559
In stock
The IFA W50 was manufactured in Werdau, East Germany, between 1965 and 1990. IFA stands for "Industrieverband Fahrzeugbau"
(Industrial Association for Vehicle Construction). The 571,789 vehicles produced were exported to 40 countries. Many are still in
use today, having been replaced by more modern trucks. Whatever someone ordered was likely delivered by IFA during the socialist era.
Unfortunately, we don't have enough models in stock to fill the platform of a W50. Orders of just a few will be delivered by courier. :-)
The IFA W50 looks fantastic both on its own and in a small diorama next to a Weimar or a K700/PK4 front loader.
The number of possibilities is practically endless.
What's in the box:
Detailed resin parts
Photo-etched brass parts
3D-printed parts
Illustrated assembly instructions
Recommended colors: RAL 5015 Sky Blue, or RAL 1011 Beige, or RAL 6018 Yellow Green
Recommended age 13 over.
Unassembled resin kit with brass (photoetched parts) parts. Paint and glue are not included!
The attached drawings instructions help to assembly.
You can use sharp tools (Sniccer, jigsaw or electric mini drill with cutter disk, thick is max. 0,5-1mm.)
to take apart the parts from the resin blocks.
Please use careful, and note that this requires a little more experience,
such than to injection molded plastic kits!
Protect the resin parts from strong heat! (Strong sunshine, radiator, hot water, etc.)
Recommended glue for the resin parts is super glue.
If you have any further questions, please contact us by email. You can find our contact informations in the menu: "information".
Length: 15cm
(Industrial Association for Vehicle Construction). The 571,789 vehicles produced were exported to 40 countries. Many are still in
use today, having been replaced by more modern trucks. Whatever someone ordered was likely delivered by IFA during the socialist era.
Unfortunately, we don't have enough models in stock to fill the platform of a W50. Orders of just a few will be delivered by courier. :-)
The IFA W50 looks fantastic both on its own and in a small diorama next to a Weimar or a K700/PK4 front loader.
The number of possibilities is practically endless.
What's in the box:
Detailed resin parts
Photo-etched brass parts
3D-printed parts
Illustrated assembly instructions
Recommended colors: RAL 5015 Sky Blue, or RAL 1011 Beige, or RAL 6018 Yellow Green
Recommended age 13 over.
Unassembled resin kit with brass (photoetched parts) parts. Paint and glue are not included!
The attached drawings instructions help to assembly.
You can use sharp tools (Sniccer, jigsaw or electric mini drill with cutter disk, thick is max. 0,5-1mm.)
to take apart the parts from the resin blocks.
Please use careful, and note that this requires a little more experience,
such than to injection molded plastic kits!
Protect the resin parts from strong heat! (Strong sunshine, radiator, hot water, etc.)
Recommended glue for the resin parts is super glue.
If you have any further questions, please contact us by email. You can find our contact informations in the menu: "information".
Length: 15cm
101.35 €
Points earned after purchase:
1.01 €
Related products